The monitor has to be placed on the camera system to fit the plastic stands into the dents. Close and don't show again Close. Reviewing applications can be fun and only takes a few minutes. Setting the contrast with the control influences the difference between bright and dark parts of the screen. The openings in the casing ensure optimum cooling and must not be covered. In case of changing the operator, the new operator has to be entered in the following column. 
| Uploader: | Tujas |
| Date Added: | 8 May 2004 |
| File Size: | 18.75 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 43845 |
| Price: | Free* [*Free Regsitration Required] |
Connection of a monitor Only connect a monitor tested according to EN The opto-electronic reading device operates on HF-energy exclusively for its own function. Kathinka van de Griendt KudoZ activity Questions: Als Teil eines Inhaltsverzeichnisses in einer Produktbeschreibung.
AED Plus - ZOLL Medical
When pulled out and rotated clockwise the knob adjusts the height and position of the line marker. In case of changing the operator, the new operator has to be entered in the following column.
Reading material should be put on the reading device. Precautionary measures if problems arise with the unit If technical problems do occur, the unit must medizinproduuktebuch switched off immediately and the mains plug disconnected. The manufacturer does not carry the cost for transport, packaging and insurance.
Reinecker Vision GmbH Home. In this way a stable position of the monitor is ensured.
Term search All of ProZ. It is a device of a protection class I.
The unit must be stored in dry and closed rooms in the medizinproduktebych packing. I've just happened to have a conference dealing with this subject. Should the leakage current of the entire unit exceed the maximum admissible value by using a monitor with excessive leakage current, in the worst case a prickle in the fingers occurs.
For this reason the focus has to be readjusted. It's a community-based project which helps to repair anything.
Peer comments on this answer and responses from the answerer agree. This applies also to texts with different font size. When pressed in and rotated it controls the brightness and contrast levels on the monitor. Login or register free and only takes a few minutes to participate in this question.
Medizinproduktebuch - Bestandsverzeichnis : Rolf-Dieter Böckmann :
This opto-electronic device should only be installed in conjunction with modern electrical circuitry. Therefore the emitted interference of high frequency disturbances is very low and the possibility of disturbing other appliances operated close-by is improbable. If the screen is dark, turn the control for contrast and brightness to the right until the document appears on the screen of the monitor the document does not have to be in focus yet.
On the cover plate of the camera system 4 dents are situated for these plastic stands. Notes on the electromagnetic compatibility EMV The opto-electronic reading device is suited for use in all set-ups including the domicile that are connected directly to a public mains supply that powers buildings for residential purposes.
Lire et mieux voir! Grading comment Full marks to you, with thanks! A correction of the magnification adjusted might be necessary. Thank God for small mercies: Make sure that no liquids get inside the unit. The following conditions for storage and transport have to be respected: Operation At the front of the VGA monitor the controls for the basic settings are situated.
Medizinproduktebuch nach §7 MP Betreib V
The magnification depends on the distance between the document and the camera. In medical environments this device must not be operated on the same electrical circuit as devices for purposes of maintaining life.
The customer or user should ensure the use in the indicated environment.
Comments
Post a Comment